The Product Chooser
Basic data ››
VS - Safety valves
• Preset pressure at 95 MPa or 105 MPa.
• Prevents your hydraulic system from pressure overload.
A safety valve is a useful component for preventing excessive
pressures in a hydraulic system. These valves are primarily
designed for use on the return side of double acting hydraulic
cylinders, and are preset at the factory for maximum pressure as
shown in the table. The preset pressure must NOT be changed.
If the preset pressure is exceeded then oil will leak out. You must
therefore ensure that the user is protected against pressurised
oil. Always install the safety valve in an enclosure or protected
area.
Dimensions
Sometimes dimensional drawings contain small details which are
hard to see when the drawing has been converted into a JPEG
image.
Download the original dimensional drawing by clicking on the link
below. The document will open in a new window.
Technical data
| Name | Preset pressure MPa (bar) |
A Int. thread |
B mm |
|
|---|---|---|---|---|
| VS14-90 | 90 | G 1/4" | 42 | |
| VS38-90 | 90 | NPT 3/8" | 46 | |
| VS14-100 | 100 | G 1/4" | 42 | |
| VS38-100 | 100 | NPT 3/8" | 46 |
Download table data (for Microsoft Excel 2001 and later)