Basic data ››

Push- and pull kit 11 ton

• Flexible tool kit for many different applications
• Interconnects with other NIKE equipment
• Many different accessories

The 11 t push-pull kit comes in three different variations: a basic kit, a standard kit and a universal kit. Which kit to choose depends mostly on the type of application it is suppose to be used in. In all kits a 11 t push cylinder is included.
If the job is carried out on different locations and full control over the cylinder movement is required, we recommend choosing a hydraulic hand pump. An air/hydraulic pump is the choice when you have access to compressed air. This pump is also more comfortable and faster to work with.
Always make sure to either use a pump with a built in manometer or connect the system to a separate manometer (see accessories below). It is essential to always have full control over the work carried out - otherwise there may be risk for personal or material damage.
The pump with hose kit is not included in the push- pull kits and has to be ordered separately (see below). There is a dedicated space in the storage box for all three recommended pump kits.

Basic kit (EB110)
The basic 11 t push-pull kit includes all necessary parts in order to get the job started. It comes with a 11 t push ram and several accessories for the ram, e.g. extension tubes, clamp heads for the ram and piston and different pressure heads.

Standard kit (ES110)
The standard kit contains all parts form the basic kit. Moreover, it comes with a spreader, a rubber coated ball, a coupling nipple and tap and a base plate. The parts make it possible to extend the range of application for the kit even more.

Universal kit (EU110)
The universal kit contains all parts from the basic and standard kit. Besides that, it comes with a 11 t pull ram and different parts for pulling such as pull shackle and chain with attachment.

The following pages can be viewed either with metric or imperial units.

Metric

Imperial

Picture showing Push- and pull kit 11 ton

Content

Name	Description	Technical data	EB110	ES110	EU110
CF110	Push cylinder	111 kN	•	•	•
TD119	Clamp head f. piston	50 kN, NPT 1 ¼ - 11 ½	•	•	•
TD120	Clamp head f. cylinder	50 kN, UN 2 ¼ - 14	•	•	•
TFP101	Extension tube	76 mm			•
TFP102	Extension tube	127 mm	•	•	•
TPF103	Extension tube	254 mm	•	•	•
TFP104	Extension tube	381 mm	•	•	•
THK112	Pressure head, pointed	NPT 1 ¼ - 11 ½	•	•	•
THT115	Pressure head, threaded	NPT 1 ¼ - 11 ½	•	•	•
THV111	Pressure head, v-notched	NPT 1 ¼ - 11 ½	•	•	•
TMT124	Coupling nipple, threaded	NPT 1 ¼ - 11 ½	•	• (x2)	• (x2)
TL125	Storage box	677x300x165 mm	•	•	•
ESH10	Hydraulic spreader	9 kN, 85 mm		•	•
THG113	Pressure head, rounded	3", NPT 1 ¼ - 11 ½		•	•
TMC121	Coupling tap	ø 32 mm		•	•
TMT122	Coupling nipple	2 x NPT 1 ¼ - 11 ½		•	•
TS130	Support plate	NPT 1 ¼ - 11 ½		•	•
CPF709	Pull cylinder	110 kN, 127 mm			•
TB141	Pull schackle f. CPF709	-			•
TK107	Chain with hook	2000 mm			•
TMK127	Chain attachment	-			•

Pump alternatives

Name	Working press. MPa	Eff. oil vol. cm³	Length mm	Width mm	Height mm	Weight kg	Contents
PH70A-600/LS201	70	600	590	90	170	5.1	ASE10, LS201ES, AQI7
PHS70-1000/LS201	70	1000	620	110	170	9,5	ASE10, LS201ES, AQI7
PP70-1000/LS201	70	1000	439	100	174	7.0	ASE10, LS201ES, AQI7