The Product Chooser
CFA - Single acting aluminium cylinders with spring return
NIKE cylinders CFA-series are all made of
high-tensile aluminium and have a superior service life compared to
similar products on the market today. The choice of material also
offers an outstanding power to weight ration - approximately 50%
less weight than comparable steel cylinders. Both cylinder tube and
piston are hard anodized for extended protection against wear and
corrosion.
All CFA cylinders come with both the saddle and a protecting base
plate made of steel to guarantee a trouble free operation even when
the surface and lifting points are not even or parallel.
Unlike some of our competitors, we design our cylinders to utilize
100% of the given capacity and stroke - maximum
power is always available.
Note! The NIKE range of aluminium cylinders are
aimed to be used in low-cycle applications such as normal
maintenance and lifting operations. These aluminium cylinders are
designed to provide a lifetime of at least 10.000 cycles and should
therefore NOT be used in high-cycle operations like production
lines etc.
For such applications please consult your NIKE representative for
advise.
Technical data
| Name | Max. working press. psi |
Capacity tonf (US) |
Stroke in |
Stroke volume in³ |
Piston ø in |
Piston area in² |
Diameter in |
Height in |
Weight lb |
|
|---|---|---|---|---|---|---|---|---|---|---|
| CFA250-100 | 10150 | 26 | 3.9 | 20.26 | 2.4 | 5.1 | 3.9 | 8.3 | 9.7 | |
| CFA250-200 | 10150 | 26 | 7.9 | 40.52 | 2.4 | 5.1 | 3.9 | 12.3 | 13 | |
| CFA500-100 | 10150 | 56 | 3.9 | 43.27 | 3.3 | 11 | 5.5 | 223,5 | 20.3 | |
| CFA500-200 | 10150 | 56 | 7.9 | 86.53 | 3.3 | 11 | 5.5 | 323,5 | 28 | |
| CFA750-100 | 10150 | 82 | 3.9 | 63.4 | 3.9 | 16.1 | 6.7 | 9.3 | 30.9 | |
| CFA750-200 | 10150 | 82 | 7.9 | 126.81 | 3.9 | 16.1 | 6.7 | 13.2 | 40.3 | |
| CFA1000-100 | 10150 | 105 | 3.9 | 80.98 | 4.3 | 20.6 | 7.5 | 9.6 | 40.6 | |
| CFA1000-200 | 10150 | 105 | 7.9 | 162.02 | 4.3 | 20.6 | 7.5 | 13.5 | 54.5 |
Download table data (for Microsoft Excel 2001 and later)




